Casio FA-124USB(PROGRAM -Link)
Hab leider nur das sehr alte Kabel von Yellow Computing. Gibt aber keine kompatiblen Treiber (trotz VM mit XP/Virtual PC mit XP) dafür zu finden. Die Sache ist die: In dem Anschluss des USB Kabels sitzt ein FT232RC und der Treiber der vom System abgerfagt wird = " Yello I/C4000". Der FT232R USB to serial UART wiederum ist hier zu finden. Die Treiber die zum FT232R auf der seite von FTDI angeboten werden, werden vom System aber im Gerätemanger nicht erkannt. Und dann kommts: 5.1 Windows 7 cannot find drivers for my device This error can occur if the VID and PID programmed into the device EEPROM do not match those listed in the INF files for the driver. The VID and PID programmed into the device EEPROM may be found by using the USBView utility from the FTDI web site. These can then be checked against the VID and PID entries in the driver INF files. If they do not match, that driver cannot be installed for that device without either re-programming the device EEPROM or modifying the list of VID and PID numbers in the INF files. Please note that only your own company VID and PID or FTDI's VID (0x0403) and FTDI PID issued for use by the customer should be used in the EEPROM and INF files. End customers should obtain modified drivers from the OEM of the device, and not necessarily edit the files themselves. 5.4 Driver will not install on Windows 7 x64 Windows 7 x64 OS will only allow certified drivers to be installed. The certified driver supplied by FTDI will work with VID 0403 and PID 6001 for FT232 and FT245 devices. It will also work with VID 0403 and PID 6010 for FT2232 devices and VID 0403 and PID 6011 for FT4232. If you have a product where the manufacture has customised the driver but has not re-certified it, then the driver will not load. You should contact your vendor to determine if they will support Windows 7 x64. Um dem Problem aus dem Weg zu gehen nun meine Überlegung: Dieses USB-Serial TTL Kabel + 3.5mm Audio - TTL-232R-5V-AJ Die Schnittstelle des Taschenrechners läuft mit Digitalpegel 5V. Weitere Angaben dazu sind dem Handbuch des fx-9750 G plus zu entnehmen: 9600 Baud, kein Parity, kein Handshake.